16 January 2018

In the II quarter of 2018 in Elabuga (Republic of Tatarstan) is planned to put into operation a new thermal power plant, the construction of which is carried out at the site of a local heat network company. The modern GTU-TPP will operate in a cogeneration cycle and supply heat and electricity.

The generating equipment consists of four gas turbine units Solar of type Taurus 60 GS with a unit capacity of 5.6 MW and four hot-water waste-heat boilers. The installed electrical capacity of the station will be 23 MW; the thermal capacity – 28 Gcal / h.

Assembly of the process equipment – a comprehensive gas treatment system of ENERGAS – was started at the construction site. The system includes gas treatment unit (packaged gas purification unit – PGPU) and a booster compressor station.



The main elements of the PGPU are a gas purification system consisting of three filtration lines and a drainage module, and a two-line gas metering unit. Additional equipment is a continuous chromatograph (calorimeter) and a dew point measurer with sampling devices.

After preliminary treatment, the gas flow is directed to the booster compressor station, including two screw-type units. The BCS compresses and feeds fuel gas to the turbines at the required design pressure of 1.65 MPa. The process scheme of the BCS also provides for the provision of a set gas feeding temperature to the GTU-TPP.

The capacity of the comprehensive gas treatment system is 8,240 m3 / h. All units are automated; local ACS will be integrated into the APCS of the thermal power plant. Equipment version - container, block-modules are equipped with safety and life support systems.

Step-by-step commissioning of BCS and PGPU, including erection supervision, start-up and adjusting works, individual testing, operability verification of equipment during GTU-TPP comprehensive test-run, as well as training of operating personnel is performed by the LLC ServicENERGAS (companies group ENERGAS).

Previous news

Back to the list

Next news